原著論文・会議論文

[2023年]

"X-ray absorption spectroscopy study of the local atomic structure in a ductile Cu-Al-Mn shape memory alloy"
Zheyua Liang, Kakeru Ninomiya, Hiroshi Akamine, Ryotaro Arai, Sumio Kise, Minoru Nishida, Maiko Nishibori
Materialia, 32 (2023) 101918.
https://doi.org/10.1016/j.mtla.2023.101918

[2022年]

"Low-cycle Fatigue Behavior of Cu-Al-Mn Superelastic Alloys at Different Temperatures"
Huanpeng Hong, Bora Gencturk, Hadi Aryan, Amit Jain, Yoshikazu Araki, M. Saiid Saiidi, Sumio Kise
Smart Materials and Structures, 31(11) (2022) 115022.
https://doi.org/10.1088/1361-665X/ac97d3

"Long-Term Corrosion Resistance of Cu-Al-Mn Superelastic Alloys and Steel Rebar for Use in Bridges"
Huanpeng Hong, Bora Gencturk, Susan Alexis Brown, Farshid Hosseini, Amit Jain, Hadi Aryan, M. Saiid Saiidi, Yoshikazu Araki, Sumio Kise
Construction and Building Materials, 350 (2022) 128795.
https://doi.org/10.1016/j.conbuildmat.2022.128795

[2021年]

"Feasibility of roll threading superelastic Cu-Al-Mn SMA rods"
Sumio Kise, Nanami Kataoka, Ryo Takamatsu, Minoru Nishida, Toshihiro Omori, Ryosuke Kainuma, Yoshikazu Araki
Journal of Materials in Civil Engineering, 33(9) (2021) 04021254
https://doi.org/10.1061/(ASCE)MT.1943-5533.0003874.

"Orientation Dependence of Plasticity and Fracture in Single Crystal Cu-Al-Mn Alloy Bars"
Sumio Kise, Yoshikazu Araki, Toshihiro Omori, Ryosuke Kainuma
Journal of Materials in Civil Engineering, 33(4) (2021) 04021027.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0003568.

"Ni過剰Ti-Ni合金に生成する非金属介在物相の安定性に及ぼすNi濃度とC/O比の影響"
山下史祥，副島洋平，赤嶺大志，西田稔
日本金属学会誌, 85 (2021) 162-166.
https://doi.org/10.2320/jinstmet.J2020056

"Chemical Resistance of Cu-Al-Mn Super-Elastic Alloy Bars in Acidic and Alkaline Environments"
Sanjay Pareek, Sumio Kise, Fumiyoshi Yamashita, Bora Gencturk, Farshid Hosseini, Susan Alexis Brown, Yoshikazu Araki
Journal of Materials in Civil Engineering, 33(1) (2021) 04020394.
https://doi.org/ 10.1061/(ASCE)MT.1943-5533.0003478.

[2020年]

"Effect of C/O Ratio on Phase Change and Stability of Inclusions in Ti–Ni Alloys Fabricated by a Commercial Production Process"
Fumiyoshi Yamashita, Yasunori Ide, Hiroshi Akamine, Kouji Ishikawa, Minoru Nishida
Shape Memory and Superelasticity, 6 (2020) 354-364.
https://doi.org/10.1007/s40830-020-00302-1

"結晶粒界性格制御によるCu-Al-Mn超弾性合金板の耐応力腐食割れ改善"
喜瀬純男，赤嶺大志，平間慧，重松和磨，高松凌，西田稔，荒木慶一，大森俊洋，貝沼亮介
銅と銅合金, 54(1) (2020) 178-183.
https://doi.org/10.34562/jic.59.1_178

[2019年]

"Effect of Nonmetallic Inclusions on Fatigue Properties of Superelastic Ti-Ni Fine Wire"
Fumiyoshi Yamashita, Yasunori Ide, Suguru Kato, Kyosuke Ueda, Takayuki Narushima, Sumio Kise, Kouji Ishikawa, Minoru Nishida
Metals, 9(9) (2019) 999.
https://doi.org/10.3390/met9090999

"単結晶，非単結晶，多結晶Cu-Al-Mn超弾性合金の繰返し引張サイクル疲労特性"
喜瀬純男，荒木慶一，鹿島大雄，大森俊洋，貝沼亮介
銅と銅合金, 53(1) (2019) 258-262.
https://doi.org/10.34562/jic.58.1_258

[2018年]

"Mechanical splicing of superelastic Cu-Al-Mn alloy bars with headed ends"
Sumio Kise, Alireza Mohebbi, M. Saiid Saiidi, Toshihiro Omori, Ryosuke Kainuma, Kshitij C. Shrestha, Yoshikazu Araki
Smart Materials and Structures, 27 (2018) 065025.
https://doi.org/10.1088/1361-665X/aabf0d

[2017年]

"Ultra-large single crystals by abnormal grain growth"
Tomoe Kusama, Toshihiro Omori, Takashi Saito, Sumio Kise, Toyonobu Tanaka, Yoshikazu Araki, Ryosuke Kainuma
Nature Communications, 8 (2017) #354
https://doi.org/10.1038/s41467-017-00383-0

"In Situ Observation of Nonmetallic Inclusion Formation in NiTi Alloys"
Fumiyoshi Yamashita, Masamitsu Wakoh, Koji Ishikawa, Hiroyuki Shibata
Materials Transactions, 58 (2017) 1729-1734.
https://doi.org/10.2320/matertrans.M2017156

"Strong interactions between hydrogen in solid solution and stress-induced martensite transformation of Ni–Ti superelastic alloy"
Ken’ichi Yokoyama, Yuki Hirata, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai
Philosophical Magazine Letters, 97 (2017) 11-18.
http://dx.doi.org/10.1080/09500839.2016.1262561

[2016年]

"Effects of temperature, phase, elastic deformation and transformation on inhibition of localized corrosion of hydrogen-charged Ni-Ti superelastic alloy in NaCl solution"
Shigekazu Nishimoto, Ken’ichi Yokoyama, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai
Journal of Alloys and Compounds, 682 (2016) 22-28.
https://doi.org/10.1016/j.jallcom.2016.04.264

[2015年]

"Inhibition of localized corrosion of Ni-Ti superelastic alloy in NaCl solution by hydrogen charging"
Ken’ichi Yokoyama, Yuki Hirata, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai
Journal of Alloys and Compounds, 639 (2015) 365-372.
http://dx.doi.org/10.1016/j.jallcom.2015.03.069

[2012年]

"Fracture and corrosion behaviors of Ni–Ti superelastic alloy under sustained tensile loading in neutral fluoride solution containing hydrogen peroxide"
Atsushi Yoshida, Ken’ichi Yokoyama, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai
Journal of Alloys and Compounds, 544 (2012) 24-29
http://dx.doi.org/10.1016/j.jallcom.2012.07.153

[1999年]

"Ni過剰Ti-Niスパッタ薄膜のマルテンサイト変態と二方向形状記憶効果"
刑部冨夫，川村良雄，佐分利敏雄，堀川宏
日本金属学会誌, 63 (1999) 201-207.
https://doi.org/10.2320/jinstmet1952.63.2_201

[2023年]

"Cyclic tensile loading tests on RC members with super-elastic Cu-Al-Mn alloy bars"
Shuichi Fujikura, Hikaru Fujioka, Tetsuya Nozawa, Yoshikazu Araki, Toshihiro Omori, Sumio Kise
Proceedings of the PCEE (Canadian Conference and Pacific Conference on Earthquake Engineering) 2023

[2015年]

"Rotating-bending fatigue properties of NiTi wires for biomedical application"
Kenji Hara, Kyosuke Ueda, Takayuki Narushima, Fumiyoshi Yamashita, Kouji Ishikawa
Proceedings of the 24th International Symposium on Processing and Fabrication of Advanced Materials, XXIV, (2015）20-28.

"Effect of light elements on fatigue properties of NiTi wires for designing biomedical stents"
Kenji Hara, Kyosuke Ueda, Takayuki Narushima, Fumiyoshi Yamashita, Kouji Ishikawa
Proceedings of the 24th International Symposium on Processing and Fabrication of Advanced Materials, XXIV, (2015) 20-28.