古河テクノマテリアル
発行論文
＜査読付き論文＞
- Sumio Kise, Nanami Kataoka, Ryo Takamatsu, Minoru Nishida, Toshihiro Omori, Ryosuke Kainuma, Yosjikazu Araki: Feasibility of roll threading superelastic Cu-Al-Mn SMA rods, Journal of Materials in Civil Engineering, vol. 33, Issue 9 (2021)
DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0003874. Open access - Sumio Kise, Yoshikazu Araki, Toshihiro Omori, Ryosuke Kainuma: Orientation Dependence of Plasticity and Fracture in Single Crystal Cu-Al-Mn Alloy Bars, Journal of Materials in Civil Engineering, vol. 33, Issue 4 (2021)
DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0003568. Open access - 山下史祥，副島洋平，赤嶺大志，西田稔，“Ni過剰Ti-Ni合金に生成する非金属介在物相の安定性に及ぼすNi濃度とC/O比の影響”，日本金属学会誌, 85, 162-166 (2021)
DOI https://doi.org/10.2320/jinstmet.J2020056 Open access - Sanjay Pareek, Sumio Kise, Fumiyoshi Yamashita, Bora Gencturk, F. Hosseini, Susan Alex Brown, Yoshikazu Araki: Chemical Resistance of Cu-Al-Mn Super-Elastic Alloy Bars in Acidic and Alkaline Environments, Journal of Materials in Civil Engineering, vol. 33, Issue 1 (2021).
DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0003478. Open access - 喜瀬純男，赤嶺大志，平間慧，重松和磨，高松凌，西田稔，荒木慶一，大森俊洋，貝沼亮介，“結晶粒界性格制御によるCu-Al-Mn超弾性合金板の耐応力腐食割れ改善”，銅と銅合金, 54, 178-183 (2020)
DOI https://doi.org/10.34562/jic.59.1_178 Open access - Fumiyoshi Yamashita, Yasunori Ide, Hiroshi Akamine, Kouji Ishikawa, Minoru Nishida: Effect of C/O Ratio on Phase Change and Stability of Inclusions in Ti–Ni Alloys Fabricated by a Commercial Production Process, Shape Memory and Superelasticity, vol. 6, 354–364 (2020)
- 喜瀬純男，荒木慶一，鹿島大雄，大森俊洋，貝沼亮介，“単結晶，非単結晶，多結晶Cu-Al-Mn超弾性合金の繰返し引張サイクル疲労特性”，銅と銅合金, 53, 258-262 (2019)
- Fumiyoshi Yamashita , Yasunori Ide, Suguru Kato, Kyosuke Ueda, Takayuki Narushima, Sumio Kise, Kouji Ishikawa, Minoru Nishida: Effect of Nonmetallic Inclusions on Fatigue Properties of Superelastic Ti-Ni Fine Wire, Metals, 2019, 9(9), 999,
DOI https://doi.org/10.3390/met9090999 Open access - Sumio Kise, Alirera Mohebbi, Mehdi Saiid Saiidi, Toshihiro Omori, Ryosuke Kainuma, KC Shrestha, Yoshikazu Araki: Mechanical splicing of superelastic Cu-Al-Mn alloy bars with headed ends, Smart Materials and Structures, vol.28, 6 (2018)
DOI https://doi.org/10.1088/1361-665X/aabf0d - Fumiyoshi Yamashita, Masamitsu Wakoh, Koji Ishikawa, Hiroyuki Shibata: In Situ Observation of Nonmetallic Inclusion Formation in NiTi Alloys, Materials Transactions, vol. 58 Issue 12, 1729-1734 (2017)
DOI https://doi.org/10.2320/matertrans.M2017156 Open access - Tomoe Kusama, Toshihiro Omori, Takashi Saito, Sumio Kise, Toyonobu Tanaka, Yoshikazu Araki, Ryosuke Kainuma: Ultra-large single crystals by abnormal grain growth, Nature Communications, 8 (2017) #354
DOI https://doi.org/10.1038/s41467-017-00383-0 Open access - Ken’ichi Yokoyama ,Yuki Hirata, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai: Strong interactions between hydrogen in solid solution and stress-induced martensite transformation of Ni–Ti superelastic alloy, Philosophical Magazine Letters, vol. 97, 11–18 (2017)
DOI http://dx.doi.org/10.1080/09500839.2016.1262561 - Shigekazu Nishimoto, Ken’ichi Yokoyama, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai: Effects of temperature, phase, elastic deformation and transformation on inhibition of localized corrosion of hydrogen-charged Ni-Ti superelastic alloy in NaCl solution, Journal of Alloys and Compounds, 682, 22-28 (2016)
DOI https://doi.org/10.1016/j.jallcom.2016.04.264 - Ken’ichi Yokoyama, Yuki Hirata, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai: Inhibition of localized corrosion of Ni-Ti superelastic alloy in NaCl solution by hydrogen charging, Journal of Alloys and Compounds, 639, 365-372 (2015)
DOI http://dx.doi.org/10.1016/j.jallcom.2015.03.069 - Atsushi Yoshida, Ken’ichi Yokoyama, Toshiaki Inaba, Kenichiro Mutoh, Jun’ichi Sakai: Fracture and corrosion behaviors of Ni–Ti superelastic alloy under sustained tensile loading in neutral fluoride solution containing hydrogen peroxide, Journal of Alloys and Compounds, 544, 24-29 (2012)
DOI http://dx.doi.org/10.1016/j.jallcom.2012.07.153 - 刑部冨夫，川村良雄，佐分利敏雄，堀川宏，“Ni過剰Ti-Niスパッタ薄膜のマルテンサイト変態と二方向形状記憶効果”，日本金属学会誌, 63, 201-207 (1999)
Open access
＜査読付きProceedings＞
- K. Hara, K. Ueda, T. Narushima, F. Yamashita, K. Ishikawa: Rotating-bending fatigue properties of NiTi wires for biomedical application, 24th International Symposium on Processing and Fabrication of Advanced Materials, PFAM XXIV, 20-28(2015).
＜査読なし論文と解説記事＞
- 喜瀬純男，荒木慶一，片岡奈々美，横山重和，東田豊彦，石川浩司，大森俊洋，貝沼亮介，“単結晶Cu-Al-Mn超弾性合金の開発と耐震分野への応用”，まてりあ，60, 54-56 (2021)
DOI https://doi.org/10.2320/materia.60.54 - 大森俊洋，草間知枝，喜瀬純男，田中豊延，荒木慶一，貝沼亮介，“サイクル熱処理による異常粒成長と銅系形状記憶合金単結晶の作製”，まてりあ，58, 137-143 (2019)
DOI https://doi.org/10.2320/materia.58.137 Open access - 喜瀬純男，荒木慶一，大森俊洋，貝沼亮介，“形状記憶合金の新たな応用展開 単結晶超弾性合金部材の開発と建築・土木構造物への応用展開”，アグネ技術センター「金属」88,(通巻1184号) 727-729 (2018)
喜瀬純男, “形状記憶合金の材料特性と応用例”，ぷらすとす（日本塑性加工学会会報誌），1，38-3（2018）
DOI https://doi.org/10.32277/plastos.1.2_132 Open access - 田中豊延，喜瀬純男，大森俊洋，貝沼亮介，石田清仁，“高加工性CuAlMn形状記憶合金の開発と巻き爪矯正クリップの実用化”，まてりあ，51, 108-110 (2012)
DOI https://doi.org/10.2320/materia.51.108 Open access